发货地： 山东济宁
適用于鑄鐵、碳鋼、不銹鋼、鈦合金等高硬度金屬材料的加工。
超高性价比
三个工作日内发货
24小时在线技术服务
品名：鑄鐵用半合成切削液
型號：SGR2322
技術指標：
性能用途：適用于鑄鐵、碳鋼、不銹鋼、鈦合金等高硬度金屬材料的加工。
藥劑特點：該產品具有優異的防銹性和潤滑性，泡沫低且具有良好的硬水適應能力，最高可抗1000PPM的硬水。
使用方法：
①推薦使用濃度：原液與水按1:20使用。
②使用（更換）新液時，應先將貯液箱（槽）及機床工作臺、裝夾具、鐵屑及污物清洗干凈。
③槽液的補充：當槽液需要補充時，加水的同時加入相應比例的本品原液，保持必須的濃度。
④工作液應保持清潔和通風，及時清除金屬屑和浮油等雜質。
⑤禁止與其他品牌切削液混用。
包裝貯存：
本品應貯存于干燥、陰涼通風庫房內，貯運過程中應避免日曬、雨淋。18L/桶、200L/桶或根據客戶需求。
Semi-synthetic cutting fluid for ferrous metals SGR2322
Product Features：
◇SGR2322 is a semi-synthetic cutting fluid, semi-transparent liquid after mixing with water, suitable for the processing of carbon steel, alloy steel, cast iron and other most ferrous metals.
◇SGR2322 has good anti-rust, lubricating and cooling properties for ferrous metals, excellent machining performance, and can effectively extend the corrosion inhibition time between processes under complex working conditions.
◇SGR2322 can effectively extend the service life of the tool and ensure the machining accuracy of the workpiece surface.
◇SGR2322 has low odor and good corrosion resistance, and the product has a relatively long service life.
Product parameters：
Test items | Index | |
Concentrate | Appearance/（15~35℃） | Uniform transparent or translucent liquid |
Storage stability | No delamination, no phase change | |
Diluent （1:20） | pH | 9.0~10.0 |
Anti-corrosion test/ （55℃±2℃）（h） | Gray cast iron；grade A；not less than 48h | |
Rust resistance test | Single piece of cast iron qualified after 48h test | |
Cast iron lamination qualified after 8h test | ||
Defoaming property/（ml/10min） | ≤2 | |
Range of application
◇SGR2322 is suitable for cutting, cutting, drilling, milling and other processing methods of the vast majority of black metals, and has good rust prevention and lubricity.
Application method
◇After cleaning the liquid tank and the machine tool, the SGR2322 is mixed with water in a certain proportion according to the on-site process requirements; the prepared working liquid is added into the liquid tank, punched out with a pump and sprayed at the cutting part of the workpiece.
Engineer suggestion
◇Please clean the the liquid tank and the machine tool before the first use of the product . It is recommended to use pure water or tap water to prepare the working liquid.
◇It is strictly prohibited to use groundwater, too soft and hard water quality, please contact our company in advance to obtain technical support.
◇The cutting fluid system should have a good aluminum scrap and impurity separation system to keep the working fluid pure and clean.
◇It is strictly forbidden to mix with other grades of cutting fluid to maintain its excellent characteristics.
Storage/Transportation/Package
◇It should be sealed and stored in a dry, cool and ventilated warehouse to prevent sun exposure, rain and impurities. The recommended storage temperature is 5~35℃.
◇Use proper loading and unloading tools to avoid damage to the package.
◇Cover with tarpaulin during transportation to prevent direct sunlight.
◇Under normal storage conditions, the shelf life of the product is 2 years.
◇Specification: 20kg or 200kg.
Copyright © 2021.@欣格瑞（山东）环境科技有限公司 All rights reserved.
网站部分资源来源于网络，无法和版权者联系，无意侵犯，如有侵权请联系我们删除
