国产无码成本人电影_国产精品久久精品第一页_国产的精品无码免费看_免费六级a一片久久精品网

品    名：飛灰鰲合劑

型    號：SGR2005

一、飛灰鰲合劑理化指標：

二、飛灰鰲合劑性能：

沉淀金屬及螯合金屬范圍廣，尤其是對重金屬的螯合；水溶性分散性好，藥劑利用率高，飛回處理性能分布穩定；可根據具體的垃圾焚燒工藝和重金屬含量進行適當的調配；可結合少量的水泥等無機材料，進一步增加穩定性和強度；處理后的飛灰，性能穩定可靠，可達到衛生填埋標準。

三、飛灰鰲合劑用途：

飛灰鰲合劑可廣泛用于生活垃圾焚燒飛灰穩定化及重金屬的固廢處理系統、河道淤泥、城市污泥、含重金屬的工業污泥、礦渣穩定化等領域。

四、飛灰鰲合劑使用方法：

（1）根據飛灰質量，稱取25%-30%的水，按照工藝要求加入飛灰鰲合劑。

（2）藥劑添加量為飛灰質量的2%-4%，若添加水泥，藥劑添加量可相應增加，具體添加量根據現場小試實驗確定。

（3）飛灰穩定化處理系統和設備及控制工藝需問相關設備公司的技術人員。

五、飛灰鰲合劑包裝：

本品包裝為25L、1t塑桶 ，不得與化學消毒藥劑混合。

六、飛灰鰲合劑儲存：

本產品應存放于陰涼干燥的室內環境中，不得在高溫或嚴寒環境中久置。

Fly ash chelating agent SGR2005

1. Product introduction

The characteristics of fly ash mixture: a wide range of precipitated metals and chelating metals, especially the chelation of heavy metals; good water-soluble dispersion, high reagent utilization, stable distribution of fly-back treatment performance; it can be properly prepared according to the specific waste incineration process and heavy metal content, and can be combined with a small amount of cement and other inorganic materials to further increase stability and strength. The performance of the treated fly ash is stable and reliable and can meet the standard of sanitary landfill.

Fly ash mixture can be widely used in the stabilization of municipal solid waste incineration fly ash and solid waste treatment system of heavy metals, river sludge, municipal sludge, industrial sludge containing heavy metals, slag stabilization and other fields.

2. Performance index

3. Usage

1、According to the quality of fly ash, 25% of the water is taken and 30% of the water is added into the mixture according to the technological requirements.

2、The addition amount of the agent is 2% of the quality of fly ash. If cement is added, the addition amount of the agent can be increased accordingly, and the specific addition amount can be determined according to the on-site small-scale test.

3、The fly ash stabilization treatment system, equipment and control process need to ask the technicians of the relevant equipment companies.。

4. Packaging and storage and transportation

(1)This product is packed in plastic buckets, 25Kg/ buckets, 1t/ buckets or determined according to customer needs.

(2)This product is stored in a dark, ventilated warehouse, away from fire and high temperature, and the storage temperature should not exceed 30 ℃.

(3)Separate from flammable, combustible, reducing agents, acids, alkalis and other substances, do not mix storage.

(4)The storage area shall be provided with emergency leakage handling equipment and suitable reception materials.

(5)) this product is not suitable for long-term storage. It is best to use it within three months after receiving the product.

5. Safety and protection

(1)To avoid inhalation and ingestion, operators must wear protective glasses, acid-and-alkali gloves, protective mouth masks and work caps, and wear protective clothing against acid and alkali if necessary.  

(2)Do not eat or drink in the course of work, pay attention to ventilation or local ventilation, and wash hands with soap and water after work.

(3)Prevent collision during loading and unloading, pay attention to sealing, and prevent packaging and container damage.

(4)Barbaric loading and unloading should be prohibited in the process of loading and unloading to ensure that the container does not leak, collapse, fall or damage, so as to prevent the solution from splashing and injuring during the loading and unloading process.